Go to footer

Beat up, hand me down Pullip in need of some TLC!

Barbie, Jenny, Fashion Royalty, Obitsu and 1/6 resins - basically anything 10-12inch/21-27cm or in the neighborhood.

Re: Beat up, hand me down Pullip in need of some TLC!

Postby MagicalGirlMimi » Sun Jan 05, 2014 10:41 pm

Hi I hope I'm not too late in writing this, but this site (http://parabox.jp/eng_new/) has a lot of wigs and obitsu parts for fairly cheap, much cheaper then any other site I've seen, and they're a little more helpful with measurements and such. Also, I found this tutorial.^^ (http://nko-ennekappao.deviantart.com/ar ... -279400766) Not sure if all the measurements are the same, but I hope it helps!~ ^-^
"Don't forget.
Always, somewhere,
someone is fighting for you.
--As long as you remember her,
you are not alone."
User avatar
MagicalGirlMimi
i see dead dolliehs
 
Posts: 55
Joined: Wed Dec 04, 2013 8:43 am
Location: Wonderland


Re: Beat up, hand me down Pullip in need of some TLC!

Postby VirgoVertigo » Thu Jan 09, 2014 8:24 pm

YandereToyBox wrote:Hi I hope I'm not too late in writing this, but this site (http://parabox.jp/eng_new/) has a lot of wigs and obitsu parts for fairly cheap, much cheaper then any other site I've seen, and they're a little more helpful with measurements and such. Also, I found this tutorial.^^ (http://nko-ennekappao.deviantart.com/ar ... -279400766) Not sure if all the measurements are the same, but I hope it helps!~ ^-^


these are very helpful! thank you! ^^ the mini pullip/obitsu hybrid is adorable, maybe when i can scrape up enough money i'll try that. parabox has a lot of useful items for cheap. thanks! <3
More Waifu Will Ruin Your Laifu


MLP Arena: PuddingPie
Instagram: @virgo_vertigo (check out my store, @vergo_vertigo_shop !)
User avatar
VirgoVertigo
my dollieh is a goooood dollieh
 
Posts: 172
Joined: Thu Nov 28, 2013 6:53 pm
Location: Maryland, USA


Re: Beat up, hand me down Pullip in need of some TLC!

Postby MagicalGirlMimi » Sat Feb 01, 2014 8:24 am

You're very welcome, good luck with your Pullip!~ I hope to see some pictures when she's feeling better. :D
"Don't forget.
Always, somewhere,
someone is fighting for you.
--As long as you remember her,
you are not alone."
User avatar
MagicalGirlMimi
i see dead dolliehs
 
Posts: 55
Joined: Wed Dec 04, 2013 8:43 am
Location: Wonderland


Re: Beat up, hand me down Pullip in need of some TLC!

Postby Marionette » Thu Feb 06, 2014 10:25 am

You could also use a Volks 1/6, Pure Neemo Flection (my favorite), or, of course, a Pullip "Make It Own" body. Pullip does sell them separately now although I don't think Pullip Style, which I find is usually the cheapest, has 'em in stock right now. Just to overwhelm you with options. :P

If you like the idea of an actual Pullip body (although you sound like you're digging a more posable body), AmiAmi has them for around 1900 yen I think, but shipping will be an additional 800-1500 yen, probably, depending on what you go with.

The Neemos can be a little frustrating to get a hold of because at certain times they're just not available, but various ones are in stock or backordered in Japanese stores (which sell overseas of course) like Hobby List Japan and AmiAmi right now. They're around 1600-1700 yen ($16-17 roughly), but the shipping will knock it up to about $25-$30.

Obitsu you obviously know, but check the prices on Hobby List Japan and AmiAmi before you buy. Even with the shipping, sometimes you can get them cheaper than Junkyspot or Parabox. That's 'cause they have no markup; they charge Japan retail prices. It'll be a while before you get the body, though. Like I said, sometimes the dolls are on backorder, so it can be a few weeks before they get the doll on hand to ship. Then, if you choose the cheapest shipping method, it can take weeks for it to arrive.

Volks has a USA shop you can order from, so it's not a huge problem shipping cost-wise or time-wise. I think you can normally get a single doll body for around $30 total including the shipping.
Marionette
i see dead dolliehs
 
Posts: 42
Joined: Tue Sep 10, 2013 5:47 pm


Re: Beat up, hand me down Pullip in need of some TLC!

Postby VirgoVertigo » Thu Feb 13, 2014 10:19 am

Marionette wrote:You could also use a Volks 1/6, Pure Neemo Flection (my favorite), or, of course, a Pullip "Make It Own" body. Pullip does sell them separately now although I don't think Pullip Style, which I find is usually the cheapest, has 'em in stock right now. Just to overwhelm you with options. :P

If you like the idea of an actual Pullip body (although you sound like you're digging a more posable body), AmiAmi has them for around 1900 yen I think, but shipping will be an additional 800-1500 yen, probably, depending on what you go with.

The Neemos can be a little frustrating to get a hold of because at certain times they're just not available, but various ones are in stock or backordered in Japanese stores (which sell overseas of course) like Hobby List Japan and AmiAmi right now. They're around 1600-1700 yen ($16-17 roughly), but the shipping will knock it up to about $25-$30.

Obitsu you obviously know, but check the prices on Hobby List Japan and AmiAmi before you buy. Even with the shipping, sometimes you can get them cheaper than Junkyspot or Parabox. That's 'cause they have no markup; they charge Japan retail prices. It'll be a while before you get the body, though. Like I said, sometimes the dolls are on backorder, so it can be a few weeks before they get the doll on hand to ship. Then, if you choose the cheapest shipping method, it can take weeks for it to arrive.

Volks has a USA shop you can order from, so it's not a huge problem shipping cost-wise or time-wise. I think you can normally get a single doll body for around $30 total including the shipping.


oh my gosh, thank you SO MUCH! i'm probably going to stick with an obitsu body because they're most common, but i'll keep these in mind if i ever decide to/have enough money do do another pullip fixer upper. i'll see about buying it from hobby list.^^ thanks again so so much~! <333
More Waifu Will Ruin Your Laifu


MLP Arena: PuddingPie
Instagram: @virgo_vertigo (check out my store, @vergo_vertigo_shop !)
User avatar
VirgoVertigo
my dollieh is a goooood dollieh
 
Posts: 172
Joined: Thu Nov 28, 2013 6:53 pm
Location: Maryland, USA

Previous

Return to Board index

Return to 1/6 Scale

Who is online

Users browsing this forum: No registered users and 10 guests