Go to footer

Krylon Krylon Krylon

General discussions about dolls, new releases, doll reviews...you know, stuff that doesn't really fit in all the other categories but is strictly about dolls.


    Forum rules
    Opinions expressed within posts are those of the posting person alone and not that of the forum or the forum management. Forum management is not responsible for things people say...though we'll kick your butt if you don't play nice.

Re: Krylon Krylon Krylon

Postby K2! » Tue May 13, 2014 11:25 am

That reminds me, it's time to reorder MSC. The two cans I bought 5 years ago are almost used up (24+, 5-6 coat face-ups later). Maybe only 1 face-up left in there.
http://www.hobbylinc.com/htm/guz/guzb523.htm
My girls are worth the right stuff.
Image
User avatar
K2!
Stoopid Noob
 
Posts: 2676
Joined: Sat Mar 20, 2010 6:31 pm
Location: The Angry Dome


Re: Krylon Krylon Krylon

Postby Vetinari » Tue May 13, 2014 12:43 pm

Oooh that listing clears up a few things. MSC is designed for polycarbonate??? Huh mebbe it's time to check out other PC-based/targetted sprays. Do I remember correctly - MSC is designed for Gundam model kits right?

Edit: Yea.. Just found this. Seems like Tamiya/MSC are designed for v.v.v.similar purposes. http://www.hobbyhovel.com/2010/08/tips- ... odels.html

Okies even more digging - apparently both MSC and Tamiya TS clear coats are lacquer based? So both acrylic and generally paint and plastic safe?
Crazy Mulitverse Crew: Drax, Jareth, Jerome, Elrana Milenkova, The Thin White Duke, Vasily Lupandin, Ramin Aiphos, Theta Sigma, Aiko Koyame, Lord Havelock Vetinari, Dr Nicholas Rush, Anon., Nyta Kinall, Otto Kreiner, That Demon, Sasu, Yaya, Ombre
...reshelling Szesil Markowski and Garan Idasson
User avatar
Vetinari
GIVE ME DOLLIEHS
 
Posts: 1479
Joined: Sun Aug 07, 2011 10:22 am
Location: UK


Re: Krylon Krylon Krylon

Postby K2! » Tue May 13, 2014 7:34 pm

Vetinari wrote:MSC is designed for polycarbonate???

I wouldn't read anything into that heading other than the paints in that section are suitable for polycarbonate.

Huh mebbe it's time to check out other PC-based/targetted sprays. Do I remember correctly - MSC is designed for Gundam model kits right?

If it was designed for Gundams, most of those kits (as other hobby model kits) are polystyrene not polycarbonate.

Okies even more digging - apparently both MSC and Tamiya TS clear coats are lacquer based?

Don't know about that either since up until recently the label on MSC was entirely in Japanese. But it does seem to have that "lacquer stank" to it.
Image
User avatar
K2!
Stoopid Noob
 
Posts: 2676
Joined: Sat Mar 20, 2010 6:31 pm
Location: The Angry Dome


Re: Krylon Krylon Krylon

Postby zirconmermaid » Wed May 14, 2014 12:28 am

Trethowan wrote:http://www.amazon.com/gp/product/B004O7HTDQ/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1

This is the kind of Krylon that was suggested to me by a person who does face-ups. It isn't the usual automotive/craft type of Krylon.

Have you guys heard about it? I'm hearing that I shouldn't use Krylon but was told this was safe.

Wah! I wish I could find MSC!!! If anyone knows of a resource I've yet to find, let me know. <3


Both my local Hobby Store, and the local Gamestore carry MSC. I nagged the gamestore into it, because I shop there. PM me.
It's all about Hazel!
Image

"Space.... the Vinyl Frontier. These are the voyages of the Starship Obitsurprise. Her 1/3rd scale mission: To seek out new plotlines, to explore the Whole Apartment - To Ball-Jointedly go where no doll has gone before!" -- Swan

Avatar by Meredith Dillman, http://www.meredithdillman.com
User avatar
zirconmermaid
It's all about Hazel
 
Posts: 3316
Joined: Sat Mar 20, 2010 6:28 pm
Location: Hazel's House, in Minnesota


Re: Krylon Krylon Krylon

Postby Kirahfaye » Wed May 14, 2014 5:20 am

Huh, I've never seen MSC at the "big box" stores like Hobby Lobby or Michaels. However, I haven't looked specifically for it, either. And can I say I am THRILLED that a Hobby Lobby is moving into the recently closed K-Mart store a couple of miles away? No more driving 14 miles to the nearest one!

I gave up on doing faceups 3 years ago when I became very ill after my one and only attempt. I used a heavy duty mask, but my throat was still adversely affected and it took 2 weeks before I got better. My husband, an environmentally scientist and a safety and hazardous waste manager, was not thrilled that I didn't go ahead and get a respirator. Recently I've been toying with the idea of trying my hand at faceups again, though....
Dollieh Nirvana
User avatar
Kirahfaye
MD - Master of Dollology
 
Posts: 3507
Joined: Sat Mar 20, 2010 3:39 pm
Location: A Galaxy Far, Far South


Re: Krylon Krylon Krylon

Postby K2! » Wed May 14, 2014 6:29 am

Kirahfaye wrote:Huh, I've never seen MSC at the "big box" stores like Hobby Lobby or Michaels.

I don't imagine MSC is one of those "high demand, high profit" products that big chains like to carry.

Recently I've been toying with the idea of trying my hand at faceups again, though....

Ditch the dust mask and buy a respirator, although you can still use the dust mask for applying pastels. A proper respirator will make a world of difference when spraying. Sounds like your husband can help you with selection and fitting. Or let someone else do the aerosols for you.
Image
User avatar
K2!
Stoopid Noob
 
Posts: 2676
Joined: Sat Mar 20, 2010 6:31 pm
Location: The Angry Dome


Re: Krylon Krylon Krylon

Postby Trethowan » Wed May 14, 2014 1:53 pm

K2! wrote:That reminds me, it's time to reorder MSC. The two cans I bought 5 years ago are almost used up (24+, 5-6 coat face-ups later). Maybe only 1 face-up left in there.
http://www.hobbylinc.com/htm/guz/guzb523.htm
My girls are worth the right stuff.


I didn't know Hobbylink existed. This is great, thanks for the resource. :-)

zirconmermaid wrote:
Trethowan wrote:http://www.amazon.com/gp/product/B004O7HTDQ/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1

This is the kind of Krylon that was suggested to me by a person who does face-ups. It isn't the usual automotive/craft type of Krylon.

Have you guys heard about it? I'm hearing that I shouldn't use Krylon but was told this was safe.

Wah! I wish I could find MSC!!! If anyone knows of a resource I've yet to find, let me know. <3


Both my local Hobby Store, and the local Gamestore carry MSC. I nagged the gamestore into it, because I shop there. PM me.



Ah. See, there used to be a hobby store in town years ago but like everything else small and awesome, it closed. I'm sure there are some out near the big mall but that's 30 minutes away.
User avatar
Trethowan
BD - Bachelors in Dollology
 
Posts: 3146
Joined: Thu Jul 15, 2010 1:27 pm
Location: Tennessee


Re: Krylon Krylon Krylon

Postby Trethowan » Thu May 22, 2014 9:20 am

Okay, I have to admit this Krylon (I'm going to use since I've got it) is pretty cool, it isn't clouding in my lovely Tennessee humidity.

That didn't stop me from buying 10 cans of MSC though.
User avatar
Trethowan
BD - Bachelors in Dollology
 
Posts: 3146
Joined: Thu Jul 15, 2010 1:27 pm
Location: Tennessee


Re: Krylon Krylon Krylon

Postby Jobee » Thu May 29, 2014 2:17 pm

My sister was looking at Krylon makeup for her She-hulk costume. I never knew it was used on cars!
User avatar
Jobee
GIVE ME DOLLIEHS
 
Posts: 1470
Joined: Wed Apr 28, 2010 8:17 pm
Location: New Hampshire, USA


Re: Krylon Krylon Krylon

Postby Trethowan » Fri May 30, 2014 4:45 am

Jobee wrote:My sister was looking at Krylon makeup for her She-hulk costume. I never knew it was used on cars!


There's the automotive line, a home-repair type of line, and the artists' line. Buy the wrong Krylon and you melt your doll. Yikes!
User avatar
Trethowan
BD - Bachelors in Dollology
 
Posts: 3146
Joined: Thu Jul 15, 2010 1:27 pm
Location: Tennessee

PreviousNext

Return to Board index

Return to Dollieh Talkin'

Who is online

Users browsing this forum: No registered users and 125 guests